Installing a kohler archer pedestal sink small bathroom space saver or in the bathroom, where you want vintage or antique look. Kohler sink does not have a large dressing table to install so that the installation process is not much more difficult than hanging objects on the wall. From the sink and pedestal, it’s a good idea to enlist the help of a second person to help facilitate this installation.
Place the base of the vertical post to the wall channels and waterways. kohler archer pedestal sink position on the pedestal post. Ask the second person to inspect the part over the sink with a level to make sure that the sink is placed in a horizontal position. Mark mounting holes for the sink and pedestal on the wall in pencil, and then place the pedestal and drowned valleys on the side. Drill pilot holes into the wall at each marked. If the hole does not go into a stud, drill a hole large enough to move the bolt. If it is possible, however, the positions of the mounting holes into studs go all sink. This is the ideal situation.
Connect sink faucet with the hardware that came with the battery. In most cases, pipe wrenches tighten the plastic nut on the screw posts, maintaining the helps which are available. Screw posts on the battery with a pipe wrench to connect the water supply line hot and cold water. Instead of putty around the hole in the kohler archer pedestal sink faucet and then attach the basket the sink with a pipe wrench. Remove any excess sealant with a tap away.