Install Copper Vessel Sinks

Copper vessel sinks – installation requires the use of silicone seal around the lips and sink drain. Common silicone have certain chemicals that can cause discoloration of copper sinks over time. Plumber’s putty typical of a whitish color and is highlighted when used around the copper sink drains. Neutral cure silicone not have these chemicals causing discoloration. Apply a continuous bead of silicone around the lip of the sink. Place the sink in the sink opening and installed according to the manufacturer’s instructions. Remove any excess silicone can be squeezed out of the edges. Smooth material at the joint between the sink and countertop with your finger. Dampen a cloth with acetone to remove any silicone film left on the counter top surface.

Copper Vessel Sinks Image

Apply a generous bead of silicone completely around the upper lip of the copper vessel sinks where they attach to the top of the counter. Insert the sink inside the box and lifted into place below the top edge. Installing the sink according to the manufacturer’s instructions. Smooth the silicone in the joint between the countertop and sink with your finger. Dampen a cloth with acetone to remove any silicone film from the top of the meter if necessary.

Related Posts:

Apply a continuous bead of silicone around the edge of the copper vessel sinks drain that will contact the sink. Insert the sink drain in the drain opening and installed according to the manufacturer’s instructions. Smooth the silicone in the joint between the sink drain and sink a finger. Dampen a cloth with acetone to remove any silicone film surface sink.

11 Install Copper Vessel Sinks Photos

Comments are closed.