How to Install Pedestal Sink : Victorian Pedestal Sink

If you are looking for an easy way to add style to a room bathroom in your home, install a pedestal sink. These pedestal sink can be mounted on any type of floor in the bathroom, even concrete. It helps to have an electric drill during this procedure to help you through the concrete walls and tiles for installation of the mounting bolts.

Clean the concrete floor around where you are installing the pedestal sink with a broom and brush. Remove anything sticking to concrete, like putty or drywall compound with a paint scraper. Spread a layer of plumber’s putty 1/4 inch (6.35 mm) wide. Press it around the hole in the bottom of the sink. Insert the tube into the drain flange and tighten by turning clockwise. Press the tab down in the plumber’s putty to secure. Tighten the jamb nut on the end of the tailpiece against the flange.

Moves the pedestal sink in position sewer inlet and the water supply valves in the wall. The hole in the rear of the pedestal should be aligned with the entrance to the drain. Lift the sink and put it on top of the pedestal. Level the sink with a spirit level. Once the toilet is located, use a marker to mark the mounting holes in the basin of the same wall. It also marks the mounting holes in the pedestal if present. Remove the pedestal and sink.

This photo of Victorian Pedestal Sink has dimension 1500 x 1500 pixels, you can download and obtain the Victorian Pedestal Sink photo by right click on the right click to get the high definition version.

Here is needful tip on Pedestal Sink Ideas. We have the finest method for Pedestal Sink Ideas. Check it out for yourself! You can get Victorian Pedestal Sink guide and look the latest How to Install Pedestal Sink in here.

Back to How to Install Pedestal Sink

Comments are closed.