DIY to Mounting Wall Mount Mailbox

0

A wall mount mailbox is an assembly process that is performed on the exterior walls of houses or buildings. By learning how to perform this task it is important to know how to set up mailboxes to walls containing asparagus, as well as cement or stucco walls.

Locate the studs using a stud finder, on the outside wall where you want to mount your wall mount mailbox. Position your mailbox on the wall and asparagus. Use the level to make sure it is horizontal and marks the screw holes on the wall with your pencil. Drill a pilot hole in 3/32 pencil marks. You must be drilled in the stanchions in this step. Place your mailbox against the wall again and screw the box to the wall with wood screws 4 inches. Pilot holes are your guides for this.

Place your mailbox on the wall of cement or stucco. Use the level to make sure it is horizontal and marks the screw holes in concrete or stucco with his pencil. Make a pilot 1/8-inch in each hole pencil marks. Insert an anchor in each of the holes and pounds his gavel. Keep your wall mount mailbox in the wall so that the holes are aligned, and tighten the screws to the wall with screws and holes cement 1/8 inches as a guide.

Share.

Comments are closed.